d e s i g n e d fo r r u g g e d e xce l l e n ce 2-17 2-17 rmc-111fb series / rmc-111pb industrial rack-mount card type ethernet to fber media converter with 1x10/100base-t(x) to 1x100base-fx ? each converter supports one 10/100base-t(x) port with auto- negotiation and auto-mdi/mdi-x ? support ethernet to fiber or ethernet to sfp port for long distance communication ? support lfp (link fault pass-through) function ? support full/half duplex operation ? support store-and-forward transmission ? provide dip-switches for function setting ? hot-swappable, high reliability and easy installation ? up to 18 slots of high-density installation in rmc-1000 chassis on the 19-inch rack introduction rmc-111 series are industrial rack-mount card type ethernet to fiber media converters for the rack-mount chassis box of rmc-1000, as these card type converters are hot-swappable and can be easily installed on rmc-1000. rmc-111 series are the cost-effective solution for the conversion between 10/100base-t(x) and 100base-fx interface, allowing you to extend communication distance by optical fiber. rmc-111 series support mdi/mdix auto detection, so you dont need to use crossover wires. rmc-111 series also support the lfp (link fault pass-through) feature. when one side of the link fails, the other side continues transmitting packets and waits for a response that never arrives from the disconnected side. use the dip-switch to enable the lfp function, then rmc-111 series will force the link to shutdown as soon as noticed that the other link has failed, giving the application software a sign to react to the situation. therefore, the rmc-111 series, with rmc-1000 as their host, are reliable media converters that can satisfy most demands of operating environments. features v1.3/ dec, 2011 industrial media converter rack-mount ethernet to fiber media converter voltage ip surveillance and auto controller system high reliability easy installation current temperature a v swappable hot swappable hot industria l ethernet switch industria l media converte r industrial device server industrial wireless access point industrial cellular vpn router network management utility accessorie s
2 industrial media converter w w w. o r i n g - n e t wo rk i n g. co m 2-18 v1.3/ dec, 2011 industrial media converter rack-mount ethernet to fiber media converter dimensions (unit=mm) oring card-type media converter model rmc-111fb-mm rmc-111fb-ss rmc-111pb physical ports 10/100base-t(x) ports in rj45 auto mdi/mdix 1 1 1 fiber ports specifcations fiber ports number 1 1 - fiber ports standard 100base-fx 100base-fx - fiber mode multi-mode single-mode - fiber diameter (m) 62.5/125 m 50/125 m 9/125 m - fiber optical connector sc sc - typical distance (km) 2 km 30 km - wavelength (nm) 1310 nm 1310 nm - max. output optical power (dbm) -14 dbm -8 dbm - min. output optical power (dbm) -23.5 dbm -15 dbm - max. input optical power (saturation) 0 dbm 0 dbm - min. input optical power (sensitivity) -31 dbm -34 dbm - link budget (db) 7.5 db 19db - 100base-fx sfp port - - 1 technology ethernet standards ieee 802.3 for 10base-t ieee 802.3u for 100base-tx and 100base-fx ieee 802.3x for flow control processing store-and-forward specifcations
d e s i g n e d fo r r u g g e d e xce l l e n ce 2-19 2-19 dip-switch setting dip-switch 1 for lfp mode selection : (on) enable / (off) disable dip-switch 2 for ethernet speed selection : (on)10mbps / (off) 10/100mbps auto-negotiate dip-switch 3 for ethernet full/half duplex selection : (on) half-duplex / (off) full/half-duplex auto-negotiate dip-switch 4 for fber full/half duplex selection : (on) half-duplex / (off) full-duplex led indicators power / indicator green : power led x 1 10/100base-t(x) rj45 port indicator green for port link/act amber for 100mbps indicator green for port duplex indicator 100base-fx fber port indicator green for fber port link/act - (on) link up / (blinking) acting / (off) link down green for fber port duplex indicator C (on) full-duplex / (off) half-duplex lfp statue indicator amber for link fault detected and passed power power consumption (typ.) 2.2 watts reverse polarity protection present physical characteristics dimensions (w x d x h) 21.8 (w) x 73.1 (d) x 126 (h) mm weight (g) 145 g 140 g environmental storage temperature -40 to 85c(-40 to 185f) operating temperature -10 to 60c (14 to 140f) operating humidity 5% to 95% non-condensing regulatory approvals emi fcc part 15, cispr (en55022) class a ems en61000-4-2 (esd), en61000-4-3 (rs), en61000-4-4 (eft), en61000-4-5 (surge), en61000-4-6 (cs), en61000-4-8, en61000-4-11 shock iec60068-2-27 free fall iec60068-2-32 vibration iec60068-2-6 warranty 2 years v1.3/ dec, 2011 industrial media converter rack-mount ethernet to fiber media converter rmc-1 a b c b - dd - ee available model model name description rmc-111fb-mm-sc industrial rack-mount card type ethernet to fber media converter with 1x10/100base-t(x) and 1x100base-fx, multi-mode, 2km/1310nm, sc connector RMC-111FB-SS-SC ndustrial rack-mount card type ethernet to fber media converter with 1x10/100base-t(x) and 1x100base-fx, single-mode, 30km/1310nm, sc connector rmc-111pb industrial rack-mount card type ethernet to fber media converter with 1x10/100base-t(x) and 1x100base-fx, sfp socket packing list ? rmc-111fb/111pb ? quick installation guide optional accessories (can be purchased separately) ? fpc series : fiber patch cord ordering information code defnition 10/100/1000base-t(x) port number 100base-fx fiber port number fiber port type fiber optical mode fiber optical connector option - 1: 1 port - 1: 1 port - f : 100base-fx fiber - p : 100base-fx sfp - mm : multi-mode - ss : single-mode - sc : sc connector industria l ethernet switch industria l media converte r industrial device server industrial wireless access point industrial cellular vpn router network management utility accessorie s
|
